Cleaning the kitchen sink grid underneath is a must every week. It's easy to stack plates and leave leftover food in the drain instead of throwing them away.
Between your busy schedule and the other daily household chores, it's harder to put in the time required to clean the sink grid correctly.
The natural accumulation of old and dirty food can remain in the kitchen's grids or the rest of the house if not often or adequately cleaned.
How to Clean a Kitchen Sink Grid
These are the items that you will need for this job:
- Baking soda
- White vinegar
- Salt
- Dish soap
- Lemon
- Non-abrasive scrubber
- Hydrogen peroxide
- Rubber gloves
Open the tap in the kitchen sink so that the water can flow freely. Insert the plunger into the outlet that is not connected to the disposal and push it in at the same time to start tilting.
To completely clean the sink, push and hold the plunger at least 60 times. I understand this is a long time, and it could get monotonous, but it's worth it. Similarly, press hard on the plunger to get the correct result.
It can be difficult to empty the sink drain with a plunger. However, if you do your best and the sink grid is still dirty, you might need to change your tactics.
As you know, clean the kitchen sink drain at the top or bottom. Start at the top, but if you still do not achieve the desired results, continue and work from the sink's bottom. After all, you want a clean kitchen sink grid. So concentrate on the P-trap under the sink.
If you actually decide to take the next step, make sure that the kitchen sink is empty. Place an empty bucket under the P-trap to prevent water from spilling on the kitchen floor.
Use the channel lock to loosen the nut that secures the P-trap, and then loosen it by hand to remove it.
Thoroughly clean the P-trap to remove accumulated dirt and gunk. Be sure to use a drainage snake or auger to clean the pipe area that leads to the sink.
Remove the hose on the kitchen wall to expose the line leading to the sewer. Insert a drainage snake into this hole to catch dirt and pieces. Continue to place the drainage snake in the pipe and twist it to pick up dirt.
Avoid pushing dirt into the sewer, as deposition at the farthest points can lead to new blockages. Avoid complicating the situation so that you don't have to hire an expert to solve the problem. If you follow the simple rules for cleaning the sewer, everything will be fine.
Reinstall the P-trap and use a wrench to secure the connection. Be sure to install the removed rubber seal when removing the P-trap.
After fixing the connection, boil the water and pour it into the sewer. This has the advantage of melting and dissolving the small amount of residual fat in the pipes and combatting odor. Dirt on the sewer of kitchen sinks accumulates bacteria, which leads to smelly sewers.
In the meantime, you can check if the connection was successful. Is there a leak under the kitchen sink? Be sure to tighten the connection to repair even the slightest leak. But if there are no leaks, I know how to clean the kitchen sink grid.
Clean the kitchen sink sewer with baking soda and vinegar. Clogged lines need to be cleaned before you start cleaning, so first, make sure your sink and dishwasher aren't blocked before you start.
Remove any food or hair residue that may have accumulated on the grid plug, lid, and top of the grid. Bring 3-4 glasses of water to a boil, and then slowly pour down the grid to wash away the small particles. A simple but very effective sink cleaner and grid dispenser put baking soda down the grid and then pour in the vinegar. Vinegar interacts with sodium bicarbonate, causing a compelling chemical reaction that produces excellent results.
You will hear a carbonated sound, vinegar interacting with baking soda. This interaction not only cleans up the leak but it also disinfects it. Leave the grid cleaner in the grid hose for 10 minutes.
From now on, clean the sink grid regularly to avoid the smelly kitchen scene. After use, be sure to wash the kitchen sink and pour boiling water down the grid. Warm water helps prevent the cooling and solidification of fatty residues. An actual mixture of vinegar and baking soda can also be poured into the sewer to avoid a case of smelly drainage.
