When it comes to household plumbing issues, there’s little more annoying than a broken or poorly functioning toilet. The toilet problems cannot only cause your utilities bills to skyrocket, but also can turn using a bathroom into a nightmare. To prevent your toilet from causing issues or breaking down, it’s important to be aware of some of the leading causes of toilet plumbing problems.

Almost everyone has encountered a clogged toilet. They’re annoying, but they can also be damaging. Unchecked clogs can cause issues to your plumbing and home, such as mold or warped flooring.

Some clogging issues are caused by flushing foreign objects down the drain. These can pose serious problems for your sewer system, creating severe backups. Besides human waste, the only items you should flush are soft paper products like toilet paper and thin napkins. While other paper products may seem like they go down just fine, they can become stuck or build up in the pipes. If you have children in your home, be careful that they don’t flush toys, fabric, or food down the drain. Your toilet’s well-being depends on it.A plunger can fix most minor clogs, but sometimes the problem is a bit worse, and it’s time to call plumber in Brisbane.

While most toilet clogs point to a problem with the toilet, some can point to a bigger plumbing problem: a sewer line clog. Sewer line clogs can result from flushed foreign objects, broken pipes, tree roots, or shifting soil. Usually, if more than one appliance is backing up with water, such as both your shower and toilet, it could point to a problem with your sewer line.

If this is the case, it’s important to call a plumbing expert as soon as possible. Leaving a sewer line clogged or crack to go without repair can be detrimental to the condition of your own health and home. The mysteries of a running toilet can drive you nuts. Whether you hear the water running constantly or cycling on and off, we’ll help you decipher the clues so you can stop wasting the water. Hardware stores and home centers carry the parts for almost all toilet repairs.

One cause of a toilet running is a flapper that doesn’t seal. If water from the tank seeps around the flapper and into the bowl, the flapper is probably shot. If the flushing performance is anemic and there are no clogs or obvious malfunctions, there may be an amazingly simple remedy. Occasionally, plumbers often forget to remove the temporary plug that’s used to pressure-test the lines after plumbing rough-in. They’re located at the top of the vent pipe up on the roof. If you can’t see a rubber cap clamped on the vent over the bathroom from the ground, climb up on the roof and inspect the end of the vent over your bathroom and I’ll bet you’ll find an overlooked plug. If so, break through the plastic with a screwdriver and pry out the pieces and that toilet will work just fine.

As with any plumbing fixture, your toilet can experience a problem every once in a while. Taking care of it right away can help you avoid more serious situations down the line—and save you money. Understanding what can go wrong with your toilet can help you be better prepared if something happens suddenly!