changing the oil in your motorcycle

The most important motorcycle maintenance routine is to change the oil regularly. With a few tips from you can easily change the oil without the need to visit a mechanic. You should keep changing the oil in your motorcycle to ensure that it operates at an optimal level. The oil will also reduce friction and excessive heating which will lead to a faster rate of depreciation. If you follow the following tips, you will find it easier to change the oil in your motorcycle. This will prevent mechanical problems, and also ensure that the motorcycle lasts for a long time.

Here are 5 Tips to changing the oil in your motorcycle;

1. Use quality oil

It is important to identify a high-quality supplier of motorcycle oil and other accessories. Using the right oil will ensure that the motorcycle parts do not wear and tear fast due to friction. Most mechanics have a specific area where they change motorcycle oil to avoid a messy work area. You should also create a space where you can drain the old oil, and put the new oil in your motorcycle without too much mess.

2. Oil filters

The oil filter serves many purposes. It helps to sieve the oil contaminants that make it impossible for the oil to serve its purpose. The oil filter helps to suspend the soot that results from combustion. You should invest in high-quality oil filters. You should also change them regularly to ensure that they serve their purpose well. Remember contaminants in the oil may easily wear off the engine. That is why you should take precautions to install and regularly monitor the oil filters in your motorcycle.

3. Get the right tools

Some of the basic tools you need to change the oil include the wrench and the paddock stand. You may also opt for motorcycles with center stand for easier mechanic operation, and service on your motorcycle. You may use the cap wrench and the torque wrench on the bolts and drain plugs.

4. Flexibility

This is especially so when changing the oil for the first time. Things may not go as per the plan. You may encounter spills or may find it hard loosening the bolts and plugs, or fail to change the oil completely. You may seek assistance from a mechanic or a friend. You should also allow for more time for the whole process. In some cases, you may misplace some of the bolts and sockets which may mean a trip to the motorcycle to get spare parts hence spending more time.

5. Counter check

After you finish changing the oil, it is good to counter check all the plugs and bolts to ensure they are well in place. This can help prevent oil spills, or mechanical problems in case anything is not correctly put in place. You may test drive the motorcycle at a low speed at first to check if everything is ok.

Changing motorcycle oil is not hard. It also gets easier with regular practice. You need the basic tools and to get high-quality oil first.